The hydraulic oil like, it might be all dirt and muck possibly never changed, if there is anything wrong with the hydraulic pump a repair kit can be gotįrom QTP in Mullingar or their local garage agents.the pumps in the MF 100 series are identical. On the top of the control valve actuator is a roller pin held between two upright blades, this roller pin is easly lost, it doing anthing with it attach a thin wire loopĪround it so if you loose it into the oil you can fish it out.įailing that youd have to take of the top cover and see if the quadrant assembly actuators are not bent or the springs clogged with muck, whats the condition of 4) Hand throttle on right hand side of the steering wheel.
#International farmall 706 hitch draft control lever serial#
draft control, also order two washers, 388574R1 for Farmall tractors 501 to 15825 and International tractors, Serial Range: 501-2411 Superseded by part number: 388573R2: 75. CODE: 369827R11 32 16.00 Good Used Right used on 330, 340, 460U, 560, & 660's In stock:1 item(s) Please Call to Order 369899R1 IH Tractor Hydraulic Valve Mounting Column CODE: 369899R1 32 85. LEVER IH LINK, draft control eccentric to sensing lever : 74. but it has a 3-position detented gate - don't understand that) 3) Four-speed gears and fwd-neutral-reverse levers (left of the river's seat). 369827R11 IH Tractor Hydraulic Control Handle Assy. On the tractor RH side is an inspection plate, in order to see if the lift arms are being actauated you have to take off this plate, a moving lever with a twist strikes anĪctuator which shifts the control valve in the hydraulic pump, this should respond to actuation by the position control movement on the quadrant. 1) Lifting and lowering the hitch linkage, as that moves with the lever (right hand side of the driver's seat). The position control lever could be seized, spray wd40 and tip the blade with something flat along its edge,light tip back and forth might move it
0 kommentar(er)
